Woochie Bald Cap - Beige

Description

Although most of the appliances can be worn in several places, it is best to check for proper alignment of some pieces. Brush Spirit Gum on the back of the Woochie® appliance anywhere it will be touching the skin. Spirit Gum may also be applied directly to the skin, especially on larger pieces. Position the Woochie® appliance onto the skin in the desired area and press into place. Edges may be trimmed for a better fit. For best adhesion, remove the Woochie® appliance and use the appliance itself (or your index finger) to tack the Spirit Gum with a rapid up and down motion. This will cause the Spirit Gum to become extremely tacky. Then firmly press the appliance back into place.
Optional Suggestions for a more professional look
For thinner edges, after applying the Woochie® appliance to your skin with Spirit Gum, the edges of the Woochie® appliance may be stippled, using a small piece of a Latex Sponge, with a thin coat of Latex. Allow this to dry before applying a second coat. A hair dryer set on low will help speed up the drying time. Powder the dried latex when finished.
After the adhering the Woochie® appliance you may want to make your piece blends in better. Use a cream foundation to match the Bald Cap to the skin color and finish with Colorless Powder. Begin by tearing a white latex sponge in half, and using the rough side of the sponge, place a small amount of Castor Sealer on the sponge and dip the sponge into the color that comes closest to matching your skin tone. Apply makeup to Woochie® appliance in a patting, or “stippling,” motion. Next using the darker makeup color, shade the Woochie® appliance in the appropriate areas. Lastly, using the lightest of the makeup colors, apply the makeup to the highpoints of the Woochie® appliance. Finally, powder the Woochie® appliance using Colorless Powder to set the makeup.
Removal
Using a small brush or cotton swab work a small amount of Spirit Gum Remover under the edges of the Woochie® appliance. Be careful when working around the eyes, to not get any remover or blood in the eyes. Once removed, remove any residual adhesive or makeup by rubbing more remover into the area. Rinse the skin using a towel and warm water. For additional applications, clean the Woochie® appliance with soap and water and a small amount of alcohol. Let dry and store out of the damaging rays of direct sunlight.
Listing and template services provided by inkFrog